Airfoil Data
MH115
MH 115 11.06%
Wing Geometry Simulator
The MH 115 11.06% is a 10.8% chord-thickness airfoil with a maximum camber of 5.4% at 38% chord, suited to general-aviation and UAV wing design. At zero angle of attack the cambered geometry generates positive lift, giving an estimated zero-lift angle of -5.4°.
Thin airfoil theory predicts a stall angle near 11.7° and a peak lift-to-drag ratio around 66 at typical UAV and light-aircraft Reynolds numbers — useful benchmarks before running a full XFOIL or NeuralFoil polar. The 11% thickness provides structural depth for main-spar placement without excessive drag penalty at moderate speeds.
Designers evaluating the MH115 typically compare it against profiles of similar thickness: GOE 478 AIRFOIL, FX 75-VG-166/22, BOEING VERTOL V43015-2.48 AIRFOIL, AH 82-150 A, EPPLER 548 AIRFOIL. The GOE 63 AIRFOIL is another reference profile frequently considered alongside it.
Stop copying .dat files.
AeroSheet loads MH115 directly into Google Sheets. Polars, 3D splines, Fusion 360 export, without leaving your spreadsheet.
Related Airfoils
Engineers evaluating the MH115 frequently compare it against profiles with comparable geometric constraints. Below are the closest matches based on maximum thickness (10.8%) and max camber (5.4%).
Need a custom engineering simulator?
The 3D engine on this page is built by Veenie Aerospace. We build bespoke, browser-native digital twins, aerodynamic simulators, and AI physics tools for UAV startups and defense contractors.